Configuring Single Sign-On (SSO)
In this article:
SSO/SLO configuration is available with CloudShell Premium Tier.
Single sign-on is an access control and authentication method that enables you to access several services through a single login page, prompting you to enter you credentials only once. You can use SSO to enable your users to access CloudShell through your homepage.
Single sign on to the CloudShell Portal is done using SAML mode. This mode relies on a third-party identity provider (IdP) for authentication and authorization, using Security Assertion Markup Language (SAML).
SAML SSO for CloudShell is implemented through Kentor Authentication services, an open-source library that adds SAML2 support to ASP.NET and IIS websites, integrating with various identity providers.
You can configure Security Assertion Markup Language (SAML) single sign-on (SSO) to allow secure web domains to exchange user authentication and authorization data (such as username and password). Using SAML, an online Service Provider (SP) can contact a separate online Identity Provider (IdP) to authenticate users who are trying to access secure content.
The following figure shows the typical use case addressed by SAML, where the principal (user) requests a service from the Service Provider. The Service Provider requests and obtains an identity assertion from the Identity Provider. On the basis of this assertion, the Service Provider can make an access control decision, in other words it can decide whether to perform some service for the connected principal (user).
Note: CloudShell supports SAML v2.0. If you encounter an error, please contact your SAML administrator.
To configure SAML SSO for CloudShell Portal:
- Set up an Identity Provider (IdP).
Note: When setting up and managing the Identity provider, make sure to configure the IdP to recognize CloudShell Portal as a service provider.
- Install a certificate on a local machine.
- Configure CloudShell to work with SAML SSO.
When setting up an Identity Provider, make sure you do the following:
- Configure a SAML 2.0 app with the required users.
Note: When creating users in the IdP, the users must have the following attributes in order to be authenticated (see this sample kentor.config example to see how they are used):
userName: with the user name;
emailAddress: with the email address;
timezoneName: with the values from the Time zone name column in MSDN's Time Zone IDs
RelayState: with the URL of the location to be directed to after sign-on
Domain: with the CloudShell domain name to log the user into (if the user's group is associated with more than one domain). To change the name of the
Domainattribute, see Customer Configuration Keys Repository.
- When a user logs into CloudShell for the first time or if the specified CloudShell domain does not exist, they will be logged in randomly to one of the domains they can access.
- The user will be logged into the domain they were last logged into if either the user does not have permission to access this domain, or no domain attribute was created in the IdP for that user.
- Plus any other attributes according to which users should be mapped into groups in the sso_group_rules.config.json file
In the ACS URL field, add the following URL:
(The [Server] should be replaced with the address or name of the machine on which the CloudShell Portal client is installed.)
- Download the X.509 Certificate acquired from the IdP. Make sure the file type is .cer.
- Copy the Identity Provider Single Sign-On URL and save it for later.
- Copy the Issuer URL and save it for later.
While setting-up an IdP, you are required to download a certificate file used for communication with the IdP. For increased security, install certificates on your local machine.
To install a certificate:
- After downloading the .cer file to your local directory, double-click to open it.
- In the Security Warning window, click Open.
- In the Certificates window, click Install Certificate.
The Certificates Import Wizard displays.
- In the Store Location section, select Local Machine and click Next.
- Select the certificate store in which you want to install your certificate, and click Next.
- Click Finish to import the certificate.
Configuration includes defining user groups and enabling the use of SAML SSO in CloudShell.
Users created in the IdP can use their defined User Name and Email attributes to log in to CloudShell Portal. If they are not pre-existing CloudShell users, they are automatically mapped to a group in CloudShell, according to the group rules defined in a dedicated sso_group_rules.config.json file.
Note: Make sure the required user groups already exist in CloudShell and are added to a domain.
For information about creating users, see Managing CloudShell Users.
To define user groups for SAML SSO:
- Create a JSON file with the groups and their constraints per your needs, and save it under the name sso_group_rules.config.json in the root folder of the CloudShell Portal installation directory.
- Alternatively, you can download the sample JSON file and use it as a template for the construction of a static predefined group.
Users are associated to a group if their attributes match all the constraints defined for that group. Users can be associated to more than one group.
Optionally, you can use regular expressions in the sso_group_rules.config.json file you created to define dynamic groups that are conditioned by the values of the SAML parameters. Once regular expressions are enabled, with the
EnableRegexelement, the constraints' values are recognized as regular expressions.
The following code sample shows a group defined using regular expressions:
Note: The asterisk in
Value="*"is recognized as a regular expression, even if regular expressions are not enabled.
- Save your JSON file under the name sso_group_rules.config.json (make sure the name is an exact match).
To enable SAML SSO:
Go to the C:\Program Files (x86)\QualiSystems\CloudShell\Server\customer.config file, and add the following key:
<add key="Authentication.ExternalLoginMode" value="Header" />
Go to the C:\Program Files (x86)\QualiSystems\CloudShell\Portal\customer.config file, add the following keys and set the required values:
<add key="CustomAbsoluteLoginPage" value="http://[server]/AuthServices/SignIn"/>(Used to redirect the user to a specified URL whenever the user browses the CloudShell Portal's login page. The [Server] should be replaced with the address or name of the machine on which the CloudShell Portal client is installed.)
<add key="CustomAbsoluteLogoutPage" value="http://[server]/AuthServices/Logout"/>([server] is the IdP server's IP or DNS. Used to redirect users after logging out of CloudShell Portal.)
- Add the kentor.config file, based on our sample file, to the C:\Program Files (x86)\QualiSystems\CloudShell\Portal folder.
- The sample file shows only the minimum requirements.
- You may also save the certificate file and use the key
<signingCertificate fileName="~/App_Data/Kentor.AuthServices.StubIdp.cer" />with your certificate file path.
Edit the file according to the additional information required by your IdP.
For more details on the file and its elements, see the Kentor AuthServices Configuration documentation.
- Restart Quali Server and CloudShell Portal IIS services.
- Open your browser and navigate to your portal.
You are redirected to the IdP’s login page instead of CloudShell Portal.
Note: When trying to access the login page, if you receive a "Missing BASE64 Value" error message, make sure you have configured all the required application details correctly in the IdP.
- Enter the user name and password you gave the user via the IdP, and you will be referred directly to the Portal's home.
The kentor.config file contains all the Authentication requirements, for example, the location of the certificate store and requested attributes for the IdP response.
The name the service provider will use for itself when sending messages. In this case, it is the CloudShell Portal location on your local machine with the addition of
The URL that you want users to be redirected to once the authentication is complete. This is typically the start page of the application, or a special signed in start page.
List of attributes to be included in the assertions generated by the identity provider. The
The name that the IdP will use for itself when sending responses. Here you must enter the Issuer URL you retrieved from the IdP.
|The URL to the sign-in page of the IdP, to which CloudShell Portal will redirect users in order to sign in.|
|This enables the IdP to initiate sign on where there was no prior authentication request.|
|The binding that the services provider should use when sending requests to the identity provider.|
|The location of the certificate store to search for the certificate you installed.|
Name of the certificate store to search for the certificate.
Note: If you stored the certificate in the Personal store, enter "My" as value. For more information see MSDN's StoreName Enumeration page.
|A search term to use to find the certificate. The value will be searched for in the field specified by the |
|The field according to which the certificate will be searched, as defined by the value in the |
Tip: You can use the SSO Tester utility to test your SSO configuration. For additional information, see SSO Tester.
Users with CloudShell credentials can access CloudShell Portal directly, not via the SSO login page. By default this is disabled.
To enable direct access to CloudShell Portal:
Go to the C:\Program Files (x86)\QualiSystems\CloudShell\Portal\customer.config
file, and add the following key:
<add key="BypassCustomLogin" value="true"/>
Restart the CloudShell Portal IIS service.
- Log in to CloudShell Portal using this URL format: https://<CloudShell Portal>/Account/Login?nocustom=nocustom.
For example: "https://126.96.36.199/Account/Login?nocustom=nocustom"
You are directed to the CloudShell Portal login page.
To disable SSO:
- Go to the C:\Program Files (x86)\QualiSystems\CloudShell\Portal\customer.config file, and take out the following key:
<add key="CustomAbsoluteLoginPage" value="http://[server]/AuthServices/SignIn"/>
- Restart the CloudShell Portal IIS service.